How to Unclog Dishwasher Drain Hose

A dishwasher is the most important appliance for a kitchen but if you see your dishwasher is not working well then it will be difficult for you to clean your appliances. Clogging dishwashers is a common phenomenon but you do not need to be worried about it because it is easy to unclog your dishwasher. By following some easy steps, you can get rid of this problem. This article will let you know how to Unclog Dishwasher Drain Hose. By following all the steps one by one you will get back your dishwasher as new. 

6 steps of Unclog Dishwasher Drain Hose

It is not a fun job to do, but if you want to remove working stress from your head, you need to make sure that your dishwasher works well. When you are dealing with the problem, follow the steps to get rid of this problem, and clean your dishes in your dishwasher. 

Step 1: Turn off the dishwasher

Before unclogging the dishwasher drain hose, you need to make sure your safety. At the very beginning, check the electricity and cut the power to the dishwasher so that you can keep yourself safe from electric shock.

Step 2: removing instruments

You need to clear your dishwasher removing all the components that are placed inside the dishwasher. You need to remove all dishes, flatware, and racks. You have to remove all the things to get space while you start your work. Removing all the instruments helps you to save from injury. 

Step 3: Removing water

If there is any water left, you need to remove them. If the water is deep enough, take a cut to remove the standing water. After removing the water, use a thick towel to soak the extra water. 

Step 4: Find the clog

Now you need to examine the hose to find out the clog of the dishwasher. As the water does not go out, the clog must be inside the hose. Once you find out the clog, you can easily get rid of this problem. After getting the problem, be ready to remove the hose. 

Step 5: Removing the hose

Now it is time to remove the hose of your dishwasher. Depending on the design of your dishwasher, you need to remove the hose. It is not a tricky task, all you need to do is undo a screw or two and then gently pull it off. Once you remove the hose, clean out the clog carefully as you do not want to put extra holes inside the hose.

Step 6: Inspect the drains

You need to inspect the drains and drain hoses so that no problem occurs in the future. Make sure your dishwasher is free from debris because debris can be the reason for clog. When you remove the hose, this is a good time for you to check the debris and remove it. After you complete all of the tasks, keep everything in place and run water for the cleaning cycle to make sure the clog is gone and your dishwasher is ready for use. 

One word of advice

When you search for clog and clean up the hose, examine if there are any worn or broken parts. If you see any broken parts, you have to replace them. You need to go out to purchase the replacement parts and then install them so that your dishwasher will be ready to go for a few more years. After replacing and cleaning the dishwasher, you need to run water for a cleaning cycle with vinegar. If you see the water runs perfectly, then you can be sure that you get all the clogs and soap build-up out of the appliance.

Final verdict

Hope! Now you are clear on how to Unclog Dishwasher Drain Hose. Make sure that you have followed all the steps carefully and replace your clogged dishwasher. Unclog your dishwasher and continue your cleaning task in the dishwasher. It helps to reduce your workload and you can easily clean all the dishes and other instruments in your dishwasher.