How To Remove Calcium Deposits From Faucet

Do you want to remove calcium deposits from your faucet?

No worries! You are in the right place because this article will let you know how to remove calcium deposits from a faucet. You only need the right cleaning product and special techniques to complete the job. By following the step-by-step process, you can easily get rid of this problem. 

7 steps of removing calcium deposits from the faucet

If you do not know how to remove calcium deposits from the faucet, then these easy steps are going to help you. Following the steps, you can easily remove deposits from the faucet. 

Step 1: Things you need

The first and foremost thing you need to do is collect some necessary ingredients. Without gathering all the required instruments, you cannot complete the removing task. Make sure that you have all the equipment and then start the task.

  • Toothbrush
  • Paper towel
  • Lemon juice
  • All-purpose cleaner
  • White distilled vinegar
  • Rubber band
  • Plastic bag
  • Rags

Step 2: Perform routine cleanings

After collecting all the instruments, you need to wash the entire faucet using an all-purpose cleaner or lemon juice. Use a mild detergent so that no damage occurs to the faucet. To clean the entire surface you need to do the job accordingly.

  • Pour one to two tablespoons of dishwashing liquid into the basin
  • Add two or three cups of warm water
  • Mix the ingredients with the all-purpose cleaner
  • Take a washrag and soak it in a soap mixture
  • Scrub the faucet by gently moving the rag in a circular motion 
  • Wash the handle, neck, and the base of the faucet thoroughly
  • Use a toothbrush and scrub the grimy areas
  • Cover the bristles of the toothbrush with baking soda
  • Create the baking soda paste by adding drops of water
  • With a gentle back-and-forth motion, move in until the surface of the faucet is free of grime
  • Cut off a 12-inch piece of floss to use in cleaning small cracks
  • Put the string between the spaces or cracks in the surface of your faucet
  • Move-in an up and down motion
  • Rinse the surface of the faucet using a wet cloth and cold water
  • Move the cloth over the surface to remove the grime, gunk, and soap mixture from the floss cleaning
  • Rinse the surface
  • Use the microfiber cloth to dry the surface by making gentle back-and-forth strokes on the entire surface
  • Do it until the surface is dry completely

Step 3: Wear gloves

Before you remove the calcium deposits, you need to put on gloves. Gloves help to protect your skin from getting damaged by chemicals and irritants. So, it is important to ensure the safety of your skin. Make sure that the gloves you are wearing are free of dirt and you wear them before cleaning the faucet to remove the calcium buildup.

Not all gloves cover most parts of your hands so make sure that you are using those gloves that cover all or most parts of your forearm. It will help to prevent the cleaner from reaching your skin in case it splashes. If you use vinegar to complete the task, then you do not need to use gloves. 

Step 4: Use calcium remover

Now it is time to take calcium remover and dilute in water

  • Take a bowl of water
  • Mix it with one part of calcium remover
  • Take one to two tablespoons of ingredients for effective results
  • If the calcium buildup is not big, you can use undiluted white vinegar 

Step 5: Put the mixture

After mixing the ingredients, you need to put the mixture into the plastic baggie and attach it to the faucet. 

  • Find a regular sized sandwich bag and pour the mixture in
  • You can use a funnel to pour them through to the baggie
  • Hold the baggie and attach it to the faucet
  • Hold it at a slight angle so that your mixture can build up in one of the corners
  • Slide the open end to the faucet and ensure you do it carefully
  • Submerge the tap in this mixture 
  • Fasten the baggie securely to the faucet using a rubber band
  • Allow it to soak for a few hours

Step 6: Remove the build-up

After a couple of hours, undo the rubber band and take off the baggie slowly and carefully. After that deposit of it. After removing the baggie, use an old toothbrush and scrub off the buildup. Gently scrub it in a back and forth motion. Continue scrubbing it until it is completely removed. Dry the faucet using microfiber and continue it until it is completely dry.

Step 7: Remove calcium buildup from the faucet plating

Using a dry clean cloth, dry the faucet and ensure that every drop of water is completely absorbed. Cover the affected areas with a drape and press down on the cloth to ensure it is completely in contact with the surface. Let it sit for at least an hour. Take a sponge and scrub the faucet again and you will see the deposits coming off. 

Final verdict

Hope! You got the answer to how to remove calcium deposits from the faucet. Now start the cleaning task and you will get an excellent result if you can follow all the steps carefully. Make sure you use the right amount of ingredients.