You know how important a kitchen sink is!
A sink can change the appearance of your kitchen. To give an extra glow to your kitchen and to have a durable and ever shining sink, stainless steel is the best choice.
Stainless steel is durable and long-lasting. If you can maintain it properly, it will last for as much as you want. After installing stainless steel, your cooking in the kitchen will become amazing and you can keep your kitchen clean easily. To install stainless steel in your kitchen here are 10 easy steps for you.
10 Easy Steps How To Install A Stainless Steel Sink
These steps will help you to learn how to install a stainless steel sink? If you follow all the steps accurately, it will take a few minutes to install a stainless steel sink.
Step 1: Fit The Faucet Unit Into The Countertop
At first, you need to fit the faucet unit into the countertop. With a pipe wrench, connect the taps to the hot and cold water pipes. Make sure that the pipes are not connected to the wrong and taps.
Step 2: Clean The Countertop
There can have some caulk from the sink opening, scrape all the old caulk. Some sharp objects can be seen in the countertop, these can destroy the caulk completely.
Wash or rub the area with detergent and clean water to remove dirty kinds of stuff from the surface of the countertop.
Step 3: Measure The Countertop
After rubbing and cleaning the countertop, you can measure the size of the countertop. For a perfect match, appropriately measure the length, width, and depth of the countertop.
This measurement is necessary because it enables you to install your stainless steel sink. An accurate measurement will not only give you a perfect size but also saves your unnecessary cost.
Step 4: Buy The Stainless Steel Sink
Now it’s time to buy your stainless steel sink. Before buying your sink make sure that the size of the countertop match with the sink. Otherwise, there will be no sense.
Step 5: Cut Off The Tip Of A Tube
Use a sizeable kitchen knife to cut off the tip of a tube of a clear silicone caulk of the sink. Cut it at a 45-degree angle. Create a light hole in the inner nozzle with a nail.
Step 6: Press The Tube
Hold the edge of your sink along with the lip or rim. Firmly press the tube to release the caulk. After that pull the tube to make sure that an equal bead of caulk.
Step 7: Place The Sink
Now you have to place the hold-down screws into the grooves. Make sure that it holds into the front, back, and sides of the sink tip. Make sure that the faucets are placed perfectly in the holes and the back of the counters.
Step 8: Check The Position
After placing the sink, check the position with your hands to ensure that the sink is well-positioned. Make sure that there is a tight seal between the counter and the sink
If the sink is not closely connected to the countertop, you may face some problems.
Step 9: Tighten The Bottom
Now you have to go to the sink bottom. Then, tighten the hold-down bolts with a slot screwdriver or crescent wrench. Ensure that the bottom is tightened enough.
Step 10: Cut Out The Extra Caulk And Test The Leak
Finally cut out the extra caulk with a razor. Clean the surface of the countertop and the stainless steel sink. Run water for testing the leak. If no leak can be found then you are done and your installation is perfect and complete successfully.
Following all these steps, you will be able to install your stainless steel sink. This article gave you an overall description of how to install a stainless steel sink? Use the necessary tools that are needed to install your kitchen sink.