Granite sinks are the most common and usable sink for a bathroom or kitchen.
They look great and give your kitchen or bathroom a befitting look when installed. The one downside of a granite sink is it is costly for this reason you cannot like to update a new sink when it is cracked.
- The 8 Best Pedestal Sink For Small Bathrooms For 2021
- The 10 Best Laundry Sink For 2021 (Top Picks)
- The 12 Best Kitchen Faucets Review (Updated List) 2021
- How To Unclog An Rv Sink (5 Effective Methods)
- 7 Key Difference – Farmhouse Sink Vs Apron Sink
- Blanco Silgranit Sink Reviews
You can easily fix the cracked of a granite sink if you follow some step-by-step process. This article is going to explain to you how to fix a cracked granite sink in 6 easy steps.
How To Fix A Cracked Granite Sink (6 Easy Methods)
What You Need To Fix The Crack
Before starting the fixing process, you need to collect some necessary components. Make sure all of them you have collected and then continue your task.
- Scouring powder
- A piece of cloth or towel
- Painters tape or newspaper
- Buffing pads
6 easy steps of fixing a crack granite sink Now take a step-by-step process of how to fix a cracked granite sink.
Step 1: Cleaning The Sink
The first thing you need to do is the cleaning process. Before you start the process of fixing your cracked granite sink, you have to clean the sink thoroughly.
If you do not clean the sink properly before starting the job, likely, the epoxy may not set properly.
If you clean the sink surface, you will also ensure any surface scratches that may have formed would be removed. Now take a look at how to clean the sink surface.
- Run hot water around the sink
- Take scouring powder and pour them into the sink
- Let them sit for about a minute
- Dampen a towel with warm water and wipe the surface of the sink using the damp cloth
- If you see any hard spots on the sink surface, then use a soft scrubbing brush to scrub the spots area. Press firmly on the spots while brushing and then rinse out the sink
- Wipe the sink with a clean dry cloth
Step 2: Preparing The Sink
After completing the cleaning and drying task, inspect the crack in the sink. A large crack is easier to fix than a small crack.
The preparation starts when you apply the epoxy. You do not get any on the rest of the sink.
- Use painter’s tape around the edges of the crack
- Cover the entire kitchen sink area without covering any of the crack itself
- The idea is to get as little of the epoxy on the rest of the sink as possible
If you do not have painter’s tape, you can use a newspaper or something similar. Once you are done with this job, you can now proceed to mix up the epoxy filler.
Step 3: Applying Epoxy
Pick an epoxy that states on its packaging. You can get the epoxy from any store near your home. It can be used for granite or stone repair. Epoxy is the most effective ingredient to fix any crack in the granite sink.
Applying epoxy can be a time-consuming process, but once you have done it right it should not take more than a couple of minutes.
For Larger Cracks
- Smear the epoxy in the crack until it is filled
- Use a plastic spatula or the tool you used in mixing the epoxy
- Use the spatula to press the epoxy firmly into the crack
- Add more epoxy if needed
- Smooth it out as best as possible
- Any bump around the surface area would need to be sandpapered later
For Smaller Cracks
Filling small cracks is the same process that you have done to fill the larger cracks. But you need to be careful when you apply the epoxy.
Instead of smearing the epoxy over the crack, you would want to take it more slowly to avoid having too much extra epoxy.
Step 4: Allowing The Epoxy To Dry
After applying the epoxy, allow the epoxy to dry. Usually, the drying time is approximately 24 hours. But depending on the brand you have used in your sink.
Follow the drying time on the package that is allocated by the manufacturer.
Step 5: Smoothen The Sink Surface
After the epoxy dry, check the sink surface for how smooth it is. It can be uneven once you apply the epoxy to the sink area. Use sandpaper to smoothen out the surface.
Step 6: Cleaning And Buffing The Area
Once you smoothen the area and you are happy with the smoothness, wash the sink more time before you buff it up and make sure it shines. Use a wet buffing pad, then gently move through, and scrub the surface of the sink.
How to fix a cracked granite sink is a very common question of the customers because they do not want to purchase the new one they want to fix the cracks. Repairing a granite sink is not much difficult if you can follow the above step-by-step process.